Can You Drill Into Concrete With A Regular Drill?

Drilling into concrete can be a difficult task, but it is not impossible. If you do not have access to a hammer drill, you can use a regular drill. Just be sure to use special bits that are made for drilling through concrete.

In order to make the drilling process easier, be sure to apply pressure while you are drilling and keep the drill in motion. If you are having difficulty drilling through concrete, try a slower speed or drilling on a harder surface.

In this article, we will discuss how to drill into concrete with a regular drill. We will also provide tips on how to make the drilling process easier.

Can You Drill Into Concrete With A Regular Drill?

Drilling concrete is a common task for many homeowners. Whether you are drilling to hang a picture frame or to install a new railing, chances are you will need to drill into concrete at some point. While it is true that a hammer drill makes the job easier, you do not need one in order to drill into concrete.

A regular drill can be used if you have the right bits and take your time. The first thing you will need is a wide array of drill bits. Concrete is a hard material and standard drill bits will not work. You will need bits that are specifically designed for drilling through concrete.

There are two types of concrete drill bits: masonry bits and carbide bits. Masonry bits are made of hardened steel and can be used on both masonry and concrete. Carbide bits are made of a very hard metal called tungsten carbide and can only be used on concrete, not masonry. The stiffer the material that you are drilling into is, the larger the bit will need to be.

When using a regular drill, it helps to have a pilot hole bit for your first few holes. A pilot hole bit has a smaller diameter than your finished hole and will create an indentation so that your other bits do not drift off target. It also makes starting the larger bits easier because there is already something in the concrete to grip onto. 

The pilot hole bit does two things: 1) It creates an indentation for the larger drill bits to grip onto, and 2) It helps the bit stay straight as it drills. When using a regular drill, you will need to apply more pressure than when using a hammer drill.

This is because the regular drill relies on its own torque to drill into the material, while the hammer drill has a motor that helps to create the torque for drilling.

How to Drill Concrete with a Regular Drill

Here are some steps to follow when drilling into concrete with a regular drill:

Step 1: Prepare the Surface – Make sure that you have an electric or battery-powered drill for this project. If you are starting with a small bit, it is helpful to use a smaller bit to create an indentation so that your larger bits do not drift off target. If your project calls for multiple holes, start by drilling one pilot hole each time. The drill should fit snugly into the opening without wiggling around.

Step 2: Drilling – Once you have drilled your first hole, insert the next bit size up and then re-drill using pressure. Continue this process until you reach your desired depth. Be careful not to apply too much pressure as this can cause the bit to break.

Step 3: Finishing the Hole – After you have drilled your hole, use a chisel and hammer to clean up the edges. This will give your hole a nice, finished look. If you are not happy with the way your hole looks, you can always go back and re-drill it.

When drilling into concrete with a regular drill, it is important to take your time and apply pressure. It is also helpful to use a smaller bit to create a pilot hole before moving on to the larger bits. If needed, you can also use a chisel to remove any leftover concrete from around the drilled hole.

If you follow these steps, you should be able to drill into the concrete using a regular drill. Just remember that it will take more time and effort than if you were using a hammer drill. Be patient and take your time, and you will be able to get the job done.

What Type of Drill is Good for Drilling Concrete?

There are two types of drills that can be used for drilling into concrete: electric drills and battery-powered drills. Electric drills can be plugged into an outlet, while battery-powered drills rely on a battery to power the drill.

When it comes to drilling into concrete, an electric drill is a better option than a battery-powered drill. This is because electric drills have more torque than battery-powered drills, which is needed when drilling into concrete. If you are using a regular drill, it is important to apply pressure in order to get the drill bit to penetrate the concrete.

If you are looking for an easy way to drill holes into concrete, then you should consider using a hammer drill. A hammer drill has a motor that helps to create torque when drilling, which is perfect for concrete.

Wrapping Up

In conclusion, there are a few things to remember when drilling into concrete with a regular drill. First, make sure you have the right bits and that your drill fits snugly into the opening without wobbling. Second, apply pressure when drilling and use a smaller bit to create a pilot hole before moving on to the larger bits.

Finally, if needed, use a chisel to remove any leftover concrete from around the drilled hole. By following these steps, you should be able to successfully drill into the concrete using a regular drill. Just be patient and take your time!